HiLetgo 2PCS APDS-9960 APDS9960 RGB Gesture Sensor Module Hand Gesture Recognition Moving Direction Ambient Light RGB Proximity Sensor Module Infrared Move Sensor

HiLetgo 2PCS APDS-9960 APDS9960 RGB Gesture Sensor Module Hand Gesture Recognition Moving Direction Ambient Light RGB Proximity Sensor Module Infrared Move Sensor

    Features:

  • APDS-9960 APDS9960 RGB Gesture Sensor Module
  • Infrared Move Sensor
  • Operational Voltage: 3.3V
  • Operating Range: 4-8in (10-20cm)
  • I2C Interface (I2C Address: 0x39)

Comimark 2Pcs GY-9960LLC APDS-9960 RGB and Gesture Sensor Module I2C Breakout for Arduino

Comimark 2Pcs GY-9960LLC APDS-9960 RGB and Gesture Sensor Module I2C Breakout for Arduino

    Features:

  • It offers ambient light and color measuring, proximity detection, and touchless gesture sensing.
  • For your convenience we have broken out the following pins:. VL (optional power to IR LED), GND (Ground), VCC (power to APDS-9960 sensor), SDA (I2C data), SCL (I2C clock), and INT (interrupt). Each APDS-9960 also has a detection range of 4 to 8 inches (10 to 20 cm).
  • With built in UV and IR blocking filters, four separate diodes sensitive to different directions, and an I2C compatible interface.
  • Package Included: 2 X GY-9960LLC APDS-9960 Gesture Sensor Breakout
  • If You Are Not Satisfied with Your Purchase for Any Reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply.

Gowoops 2PCS of APDS-9960 Hand Gesture Recognition Moving Direction Ambient Light RGB Proximity Sensor Module

Gowoops 2PCS of APDS-9960 Hand Gesture Recognition Moving Direction Ambient Light RGB Proximity Sensor Module

    Features:

  • Operational Voltage: 3.3V
  • Operating Range: 4-8in (10-20cm), I2C Interface (I2C Address: 0x39)
  • This is a RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing.
  • With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more with a simple swipe of your hand!
  • The APDS-9960 is a serious little piece of hardware with built in UV and IR blocking filters, four separate diodes sensitive to different directions, and an I2C compatible interface.

DAOKI 2PCS APDS-9960 APDS9960 Hand Gesture Sensor Module Non-Contact RGB Gesture Recognition Moving Direction Ambient Light RGB Proximity Sensor Module Infrared Move Module with Dupont Cable

DAOKI 2PCS APDS-9960 APDS9960 Hand Gesture Sensor Module Non-Contact RGB Gesture Recognition Moving Direction Ambient Light RGB Proximity Sensor Module Infrared Move Module with Dupont Cable

    Features:

  • Working voltage: 2.4V-3.6V; Interface type: I2C interface; Measuring range: 4-8in (10-20CM)
  • Built-in APDS-9960 sensor for ambient light and color measurement, proximity detection and non-contact gesture detection.
  • The ambient light dynamic range has also increased from the previous 10K lux to 30K lux, and the solar calibration has been greatly increased to 50K lux, which greatly improves the sensitivity and avoids strong light interference.
  • You can measure the light reflectance of each basic position over time and convert those changes into gestures. Our interface library can detect directional gestures (left to right, right to left, top to bottom, bottom to top)
  • Package Content:2 x APDS-9960 APDS9960 Hand Gesture Sensor Module, 1 x 11.8″ Female-Male Dupont Cables 20 PIN

ACROBOTIC APDS-9960 Proximity, Light, RGB and Gesture Sensor Breakout Board for Arduino Raspberry Pi ESP8266 3~5VDC APDS9960 GY-9960

ACROBOTIC APDS-9960 Proximity, Light, RGB and Gesture Sensor Breakout Board for Arduino Raspberry Pi ESP8266 3~5VDC APDS9960 GY-9960

    Features:

  • Onboard APDS-9960 measures ambient light, color (RGB), proximity, and touchless gestures!
  • Operating Voltage: 3.3 to 5.5V; interface: I2C (0x39 address; can’t be changed)
  • Pinout (5-pins) used for I2C communication (SDA, SCL), power (Vin, GND), and interrupt (INT)
  • Size: 17.8×17.8mm (0.7×0.7″)

RGB and Gesture Sensor – APDS-9960

RGB and Gesture Sensor - APDS-9960

    Features:

  • Built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing.
  • With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more with a simple swipe of your hand!
  • Ambient Light & RGB Color Sensing, Proximity Sensing, Gesture Detection, Operating Range: 4-8in (10-20cm)

Tangyy 2PCS APDS-9960 RGB Infrared Gesture Sensor Motion Hand Gesture Direction Recognition Sensing Module for UNO

Tangyy 2PCS APDS-9960 RGB Infrared Gesture Sensor Motion Hand Gesture Direction Recognition Sensing Module for UNO

    Features:

  • ADDS9960: Operational Voltage is 3.3V. Easy installation, simple structure, safe and reliable, small volume.
  • Advantage:With infrared LED proximity sensor, intelligent recognition gesture, high precision induction
  • Environmental protection:Use environmental protection material, longer service life, lower consumption.
  • Application:You can control computers, microcontrollers and robots through gestures to better liberate your hands.
  • More detail: It can also be used to test ambient light, RBB color sensing, proximity detection, gesture detection.

As an Amazon Associate I earn from qualifying purchases.

Random products:

gkvk
apartments in Łąck