Auphonix Pop Filter Screen for Microphones – Gooseneck Clamps Compatible with Blue Yeti Microphone
- Cleaner Audio: This pop filter for microphones helps produce pristine sound quality by filtering pops, hisses and thuds. By providing a screen and gap, the pop screen helps disperse air pressure. Effectively reduces the plosives or wind interference.
- Double-Mesh: With a dual-layer mesh screen, the microphone pop filter won’t stifle sound or diminish the quality of your voice. The pop shield for mics works to remove interference while elevating audio quality.
- Adjustable Gooseneck: Mounted on a flexible and fully rotational arm. The microphone filter can accommodate any studio space, height or angle. These audio accessories are compatible with Blue Yeti microphones.
- Easy Installation: Designed for stable and ultra-secure mounting. Adjustable clasp can fit on surfaces up to 1.75”. This microphone pop filter connects directly to edge of table or desk, microphone stand, and boom pole.
- Sound Necessity: If you’re a singer, vlogger, voiceover artist or podcast host, you want your voice to be heard. This mic filter helps block any hisses, pops or thuds to provide you with clean audio. Essential in to creating professional content.
Auphonix Microphone Pop Filter (MPF-1) 6-inch Diameter With Double Mesh Filter Screen
- POP FILTER has a double layer of mesh to ensure the best recording free of distortion. No more post-production hassle trying to reduce the pop sounds.
- MICROPHONE POP FILTER has a flexible yet sturdy gooseneck holder which easily supports the weight of the shield, allowing for simple set-and-forget placement.
- MIC POP FILTER makes all your recordings sound professional. Even in video it’s been shown that quality audio is much more important than a quality image. People will literally switch off the video if the sound is poor.
- POP SHIELD can be used for singing, voiceover, podcasts, vlogging and anywhere else you need quality sound.
Microphone Stand for Blue Yeti and Blue Yeti Pro with Mic Windscreen and Double layered screen Pop Filter Heavy Duty Boom Scissor Arm Stands,Broadcasting and Recording
- Professional Adjustable Microphone Stand:Professional Recording Studio Equipment with adjustable microphone stand, Adjustable Shock Mount, double layer Pop Filter , Screw adapter, microphone shock mount, Table mounting clamp with sponge pad. The diameter of ABS plastic microphone shock mount is 1.77”/4.5 cm,it can be changed by adjusting the O-rings of shock mount,compatible various mic.Max diameter:2.05”/5.2 cm.
- Strong Compatibility and Applicability: Luling Arts mic arm could compatible with the Blue Yeti, Snowball or mount most standard-sized microphones. 3/8” to 5/8”Screw adapter are line with industry standards. Adjustable shock mount and universal mic clip also provide more possibilities.Max Support Weight is 70 oz/2 kg (4.4 pound).
- Upgraded table mounting clamp:Designed for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up to 2.16″（The product is 6 cm） to fit most desktop can carry heavy microphone for a long time.
- Excellent Shock Mount Effect: The diameter of the mic clip can be changed by adjusting O-rings on shock mount, perfect suit for mics with a diameter of more than 4.5cm. The professional suspension shock mount isolates most studio condenser mics from physical vibration, floor, and stand noise. Take Your Recording and Streaming to the Next Level.
- Two-Screen POP Filters: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Banish the dreaded hissing and lisping sounds that come when pronouncing the letter “S” and blocks those ugly “plosives” that follows “B” and “P”.(with great customer service, Luling Arts offers 12-month repair/replacement and 30-day hassle-free return.)
Microphone Suspension Scissor Boom Bracket Stand with Pop Filter and Mic Holder, 5/8”Screw for Blue Yeti, Snowball, Spark, Yeti x and All Other Microphones by Pipishell
- PREMIUM-GRADE MATERIAL BOOM ARM MIC STAND: The upgraded super-strong spring prevents your microphone from accidental dropping, noise generation and shaking. Package includes a desk mounting clamp and protective layers of sponge, so you can easily clip the mic to any desktop within 5cm thickness.
- HIGH-QUALITY DOUBLE LAYRED POP FILTER: The microphone windscreen is used for filtering the hard-hitting sounds produced by “b”, “t” and “p”. It also filters out the needless background noise and sound of wind which improves the quality of sound as a result. Note: Clamp the pop filter directly on the bracket, remember to clamp the plane of the bracket.
- UNIVERSAL COMPATIBILITY WIDELY USED: This desk microphone stand applicable to any can be installed on most standard-sized hand-held microphones and partial condenser microphones, including Blue Yeti, Blue Yeti Pro, Snowball and others. The minimum load is ZERO and the maximum load is 2.5 pounds/1.14 kilograms.
- ADJUSTABLE & PORTABLE TO CARRY: The mic arm stand consists of two adjustable arms of 35cm and it can be folded up and bended for better storage, so it is suitable for many occasions, like personal studios, broad casting and TV stations, voice/sound music studio, home studio, stores and stages etc.
- PRECAUTIONS FOR USE: Please note that the mounting hole in the Yeti microphone is only slightly larger than 5/8”industry standard due to the manufacturing issues. Here is the suggestion, please use the thread tape (not included) to wrap around the mounting screws on the arm stand and in this way, it can effectively increase the thickness of mounting screws so that it can connect to Yeti mic in a convenient way.
InnoGear Microphone Stand for Blue Yeti Adjustable Suspension Boom Scissor Arm Stand with 3/8″to 5/8″ Screw Adapter Shock Mount Windscreen Pop Filter Mic Clip Holder Cable Ties
- Shock Mount: Please noted the shock mount is not fit for Blue Yeti.It is made of high-quality material and can protect the microphone all-around with high rubber rope design which makes the microphone more convenient to install and prevent it from falling. The shock mount has a hole diameter of 52mm, which is slightly larger than others.
- Heavy-duty Structure Mic Stand: The extra strong spring prevents the microphone from accidental dropping, noise generation and shaking. It has a table mounting clamp and protective layers of sponge. An adjustable positioning screw can easily clip to any desktop with a thickness of 2″.
- Double Screen Pop Filters: The first screen blocks air blasts as any pop filter normally would. The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained.
- Especially Design: The cable ties which adopt the self-locking fastener design, strong durable powerful lock, easy handling and prevent snagging in tight.
- All-in-One Combo: Package includes all the items you need for studio recording and live sound, a microphone stand, a zinc alloy table mounting clamp, a 3/8″ to 5/8″ metal screw adapter to make it perfect for blue yeti and other microphones, a pop filter, a shock mount and five cable ties, easy to assemble and carry.
InnoGear Microphone Arm, Upgraded Mic Arm Microphone Stand Boom Suspension Stand with 3/8″ to 5/8″ Screw Adapter Clip for Blue Yeti Snowball, Yeti Nano, Yeti x and other Mic, Medium
- Foldable Arm Band: The adjustable microphone arm can be folded up and easy for you to carry around. This feature enables to adjust the suitable angle and height to show your perfect voice. Before adjusting the angle of the microphone arm stand make sure to loosen the knob first. Avoid rotating it by force as it can damage the screw threads.
- Upgraded Desk Mount: In comparison to the old versions, this zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2″ to fit most desktop.
- The 5/8″-27 male to 3/8″-16 female screw adapter which included in the package fits for blue snowball.The Diameter of Microphone Clip is 1.10″. Suitable for any stores, families, stage, studios, broadcasting and TV stations, etc.
- Heavy Duty Steel Structure: Super-strong spring with extra positioning screw, compact microphone arm stand designed for heavy duty carry. Max load: Approx.53oz/1.5kg.
- Note: The mounting hole on the Yeti Mic is sometimes just a tiny portion bigger than the 5/8″ industry standard. You are suggested to use Thread Tape (included) to wrap around the mounting screw on your shock mount. This will effectively increase the thickness of the mounting screw, while still maintaining the actual screw thread and will enable you to connect to your Yeti.
Knox Gear Shock Mount for Blue Yeti and Yeti Pro Microphones (Black)
- COMPATIBILITY: This Knox Gear Shock Mount is designed specifically for Blue Yeti and Yeti Pro microphones and is a great choice if you’re looking for a versatile shock mount that can be easily attached to most boom arms
- WHY NEED A SHOCK MOUNT?: Audio produced by the most expensive microphone can be rendered unusable if it’s sitting on an unstable surface. Even the slight vibrations can produce disruptive noises in your recordings so it’s important to use a shock mount to eliminate as much vibration and mechanical noise as possible
- ABSORB AND REDIRECT VIBRATIONS: This mount is designed to absorb and redirect vibrations away from the Yeti to reduce audio interference that can ruin recordings. There’s also a padded rear stopper to hold the Yeti in the perfect position while it’s in the mount
- HEAVY-DUTY CONSTRUCTION: The Knox Gear Shock Mount is made of metal and features high-tension elastic cords that isolate the Yeti mic
- ADJUSTABLE HINGE: This Yeti mount features a fully adjustable hinge so you can quickly and easily set the microphone’s position to the angle that works best for you. The hinge is held in place by a thumb screw so you can set the tension as loose or as tight as you’d like, too
As an Amazon Associate I earn from qualifying purchases.